公路隧道穿越陡倾煤层采空区力学特性分析

针对隧道穿越陡倾煤层的施工力学特性,采用数值计算方法,探讨隧道施工对采空区围岩变形和受力的影响,结果表明,围岩应力分布规律受采空区影响显著,陡倾煤层采空区前后15 m为隧道施工过程中加强支护和重点监测范围。通过分析陡倾采空区对隧道结构的影响程度和规律,发现采空区的存在使得隧道支护结构主应力最大值增大约15%~20%,对隧道整体结构的稳定性不利。     

基于三维实景模型公路桥梁BIM正向设计研究

采用Midas CIM桥梁三维正向设计软件,依托濮阳至聊城高速公路卫城枢纽主线跨线桥工程,基于三维实景模型开展节点桥梁BIM正向设计。将三维模型输出的钢箱梁关键指标与传统二维设计模式输出的结果进行对比分析,结果表明三维正向设计结果可靠,可实现设计阶段BIM模型向施工阶段数字化交付。     

无桥台斜腿刚架桥三维弹塑性分析

以武汉绕城公路K46 024 5跨线桥为原型,建立三维实体模型进行弹塑性分析,模型中考虑桥与周围土体的相互作用,得到无桥台斜腿刚架桥的真实位移、应力和破坏区域的分布,并与常规设计所采用的强迫位移法进行比较,分析常规设计计算的结果与桥的真实受力状态的差别。对于相互作用问题,本文提出土体计算范围与计算跨径的合理比值,从而为该桥型的设计与计算提供有重要参考价值的科研依据。     

Hydroelastic analysis of oblique irregular waves with a pontoon-type VLFS edged with dual inclined perforated plates

The fluid-structure interaction of oblique irregular waves with a pontoon-type very large floating structure (VLFS) edged with dual horizontal/inclined perforated plates has been investigated in the context of the direct time domain modal expansion theory. For the hydroelastic analysis, the boundary element method (BEM) based on time domain Kelvin sources is implemented to establish water wave model including the viscous effect of the perforated plates through the Darcy’s law, and the finite element method (FEM) is adopted for solving the deflections of the VLFS modeled as an equivalent Mindlin thick plate. In order to enhance the computing efficiency, the interpolation-tabulation scheme is applied to assess rapidly and accurately the free-surface Green function and its partial derivatives in finite water depth, and the boundary integral equation of a half or quarter VLFS model is further established taking advantage of symmetry of flow field and structure. Also, the numerical solutions are validated against a series of experimental tests. In the comparison, the empirical relationship between the actual porosity and porous parameter is successfully applied. Numerical solutions and model tests are executed to determine the hydroelastic response characteristics of VLFS with an attached anti-motion device. This study examines the effects of porosity, submerged depth, inclined angle and gap distance of such dual perforated anti-motion plates on the hydroelastic response to provide information regarding the optimal design. The effects of oblique wave angle on the performance of anti-motion and hydroelastic behavior of VLFS are also emphatically examined.     

纵向斜船台滑道并列造船止滑器布置研究

为避免止滑器与滑板卡扣碰撞,纵向油脂滑道的止滑器要求安装在滑道的外侧,以避开滑道内侧的滑板卡扣.并列造船的船台,为满足不同船型的下水要求,主滑道两侧均需安装止滑器,由此带来了止滑器与卡扣干扰的问题.本文结合工程实际,对止滑器布置进行研究分析,根据实际需求采用不同的布置方式,解决止滑器与滑板卡扣干扰碰撞问题,保证了滑道下水安全.     

双层开孔斜挡板透空式防波堤消浪性能研究

针对一种新型双层开孔斜挡板透空式防波堤消浪性能问题,研究挡板开孔率和挡板倾斜角度对防波堤消浪性能的影响。采用物理模型试验方法,得出其反射和透射系数、波能分布和堤后波幅频谱特征结果。结果表明,斜挡板开孔率越大,防波堤透射系数也越大,但在试验范围内,透射系数均小于0. 5;该类型防波堤对波浪有较好的消能性,对较长周期波以反射为主,较短周期波以消浪室消能为主,整体透射系数较短周期波略大;防波堤设计斜挡板比平挡板透射系数小,具有更好的消浪性能,最小透浪仅为后者的39%。     

向量法在不规则隧道边仰坡面积计算中的应用

根据隧道边仰坡三维坐标测量数据,通过计算边仰坡斜面和投影水平面的法向量,进而计算两面之间夹角的方法,反算边仰坡斜面面积,在类似不规则隧道边仰坡等斜面面积计算中具有广泛的应用价值。     

两种大型集装箱船绑扎桥结构强度的对比计算浅析

以大型集装箱船常见的剪力墙式绑扎桥和A型斜撑式绑扎桥为研究对象,基于通用大型有限元分析软件PATRAN/NASTRAN及CCS规范的相关要求,对两种绑扎桥的结构强度进行了对比计算分析。结果表明：两种型式的绑扎桥在结构强度方面相差不大,相比而言,剪力墙式绑扎桥略优于A型斜撑式。     

Extension of the super-elements method to the analysis of a jacket impacted by a ship

The aim of this paper is to present a simplified analytical method for estimating the crushing resistance of an oblique cylinder impacted by the stem of a striking ship. The collision angle of the vessel is arbitrary, i.e. oblique collisions are also considered in this article. The two extremities of the tube are assumed to be clamped. These developments are intended to be used for evaluating the crashworthiness of an offshore wind turbines jacket. To achieve this goal, closed-form expressions are first derived for the particular situations of a horizontal and a vertical cylinder by applying the upper-bound method. An interpolation formula is then proposed to get the resistance opposed by the tube for any inclination angle. In order to validate these theoretical developments, some comparisons are made with the results of numerical simulations. These latter are performed using the finite elements software LS-DYNA. In almost all cases, the analytical prediction of the resistance is found to be in quite good agreement with the numerical ones. Finally, another comparison is made by simulating an OSV collision with a full jacket. In this case, the theoretical model is found to be insufficient for large impact energies and points out the need of further research.     

海河综合开发工程新建桥梁结构技术特点

该文主要介绍海河综合开发工程3座新建桥梁(大沽桥、奉化桥、蚌埠桥)的结构形式特点,并分别描述这些桥梁的设计难点以及特殊构造处理措施。